A faucet that will not shut off, a spray that leaks under the sink or a handle that has snapped can flood a cabinet before you notice. If water is escaping, close the small shutoff valves under the sink by turning them clockwise. If there are no shutoffs, close the main water valve. Then call, and we will schedule a plumber to repair or replace the faucet.
Not every faucet is worth saving. Some can be restored with a new cartridge, washer or O-ring in a few minutes. Others have worn bodies or discontinued parts, and replacing them costs less than chasing repairs. The plumber checks the model and age, then tells you which route saves money.
Where faucets leak and why
Where the water appears points to the cause. A drip from the spout means a worn cartridge, ceramic disc or washer. Water around the handle means a worn O-ring or seal. A leak at the base means a failed seal or a loose mounting. Water beneath the sink might be a supply line, a shutoff valve or the faucet body itself. Pinpointing it first avoids replacing the wrong part.
Quick checks before the visit
- Close the shutoff valves under the sink if water is escaping.
- Dry the area and see whether the drip returns, and from where.
- Note the brand name on the handle or spout.
- Take a photo of the faucet and under-sink connections.
| Symptom | Likely cause | Typical fix |
|---|---|---|
| Drip from the spout | Worn cartridge or disc | Replace cartridge |
| Leak around the handle | Worn O-ring or seal | Replace seals |
| Low flow | Clogged aerator or cartridge debris | Clean aerator, flush cartridge |
| Leak under the sink | Supply line or shutoff valve failure | Replace line or valve |
| Handle loose or stiff | Worn parts or mineral film | Replace parts, lubricate |
Cartridge faucets and brand specifics
Most modern faucets use a replaceable cartridge, and matching the right one matters. Brands differ in cartridge design, and some require specific tools. Our plumber identifies the make and model and installs a matched part. If a brand's parts are hard to find, the plumber tells you before work starts, and may suggest a replacement faucet instead.
Faucet leaking under the sink or won't shut off?
Call and a plumber will fix or replace it, and tell you the price up front.
Low pressure and slow flow at one faucet
If only one faucet has low flow, the problem is local, often a clogged aerator or debris in the cartridge. If every faucet is weak, the issue is the supply, a partly closed valve or a failing pressure regulator, and a plumber should check the line. Persistent drops in flow can also point to a hidden leak, which our leak detection service can trace.
Faucet replacement
When a faucet is beyond repair, we remove it and install a new one, replacing the supply lines and checking shutoff valves. Old shutoffs that will not close or that weep are replaced at the same time so the next repair is simple. If you want a kitchen faucet with a pull-down sprayer or a bathroom set with a new drain, mention it when you call.
What matters for Happy Valley faucets
Happy Valley's water is soft, so mineral crust on aerators is less common than in hard-water areas, and faucets last longer between repairs. Many local homes have faucets that are 10 to 20 years old, which is the age where cartridges and seals wear out.
Water pressure can be higher on lower streets near Mount Scott's slopes, and high pressure stresses faucet parts, so a pressure check is part of a thorough visit.
If you also have a slow kitchen drain or a garbage disposal issue, we can handle them in the same visit.
Pricing
A cartridge or seal repair costs much less than a full faucet replacement. You hear the price before work starts, including parts and labor. If you supply your own faucet, tell us when you book and we will install it.
Code and parts notes
Faucets and supply stops sold for drinking water must meet lead-free requirements under the federal Safe Drinking Water Act, and the Oregon Plumbing Specialty Code (OPSC), based on the Uniform Plumbing Code (UPC), points to listed fixtures. Like-for-like repairs usually need no permit, but permit rules vary, so ask the Happy Valley building department.
Faucet repair questions
A slow drip can wait for a visit. A faucet that will not shut off, or a leak flooding a cabinet, is urgent. Close the shutoffs and call.
We repair most common residential brands. Tell us the brand and model if you can, and we will confirm parts before the visit.
A worn cartridge, washer or seal is the usual cause. Replacing the worn part stops it.
If parts are available and the faucet is in good shape, repair is cheaper. If it is old, corroded or the finish is failing, replacement makes sense.
The aerator or cartridge may be clogged. If every faucet is weak, the problem is elsewhere in the home's supply.
Yes. Replacing old lines and valves during a faucet visit prevents future leaks and makes later repairs simple.

